OLD MASTERS TUNG OIL
This penetrating Tung Oil creates a beautiful, hand-rubbed finish. This product provides a durable water and alcohol resistant oil finish that will not crack, chip, or peel.
Where to Use
Tung Oil is recommended for use on interior, bare wood surfaces. Ideal for use on antiques and fine furniture.
Surface Preparation
All surfaces must be clean, dry, and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected.
APPLICATION
• Apply Old Masters Tung Oil with a lint-free cloth or by hand. On large surfaces or in high humidity, thinning with mineral spirits will improve application. Up to one (1) part mineral spirits to one (1) part Tung Oil may be used; however, thinning beyond this ratio will result in noncompliance with VOC regulations.
• When the entire area has been coated, wipe off excess oil with a soft, lint-free cloth.
• If a second coat is desired, allow the first coat to dry, then rub down with 0000 steel wool.
• Repeat steps 1 and 2. Do not apply more coats than the wood can absorb.
Thinning
Up to one (1) part mineral spirits to one (1) part Tung Oil may be used; however, thinning beyond this ratio will result in noncompliance with VOC regulations.
Coverage
Approximately 300 to 400 square feet per gallon depending upon method of application and the type and porosity of wood.
Drying Time
Apply when air and surface temperatures are between 60° and 90°F and humidity is between 30% and 70%. At 50% relative humidity and 70°F, 100% Tung Oil will dry in approximately 8 to 12 hours.
Cleanup
For cleanup, we recommend using a cleaning solvent that is compliant in your air quality management district. Check with your local government agencies to ensure proper compliance.
| DANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations. |
MAX VOC: 8 g/L (0.1 lbs/gal).
Old Masters offers an extensive line of wood care products that enable you to beautify or protect all of your fine wood finishes. Using a combination of Old Masters wood care products will ensure these treasured pieces will sustain their beauty forever.
PROTECT
Tung Oil and Tung Oil Varnish are best for. . .
...creating a beautiful, hand-rubbed finish. Both products are ideal for use on antiques and fine furniture. These easy-to-use, rub-on finishes are nearly fool-proof and can be applied easily with a rag.